Now we are using the printer, and it should go backwards and lower the platform. It goes all the way out and raises the platform and seals the printhead. Hold this lever back while turning the gear to the left counterclockwise (going in) and clockwise (going out). If you push this lever to the right, you will see a smaller gear pop out from underneath the larger two, moving to the left. Return to the pair of gears on the right and look for the little lever between the two. Try turning this gear counterclockwise from the left side, and you’ll see that nothing happens. The sucker is driven by the small, white gear found within the printer. If you move the carriage from side to side and the lever moves with it, that means that the position of the carriage is too high, so it essentially locks into the carriage.
The problem lies with the sucker in the middle of the carriage. Thankfully, there is a relatively easy way to unjam your print carriage, and in this short blog by BCH Technologies, we are going to show you how.įirst, it’s important to note that the sliding lever to the side of the carriage does not cause the issue-that has nothing to do with it.
Sound familiar? This is a common yet frustrating scenario that many people run into with their HP devices. After using it for some time, you find that you can no longer move the print carriage. So you’ve purchased an HP OfficeJet printer.
0 kommentar(er)
